The Disc–O–Matic drive system ensures smooth transitions between any of the six forward or two reverse speeds typically supported on Ariens snowblowers. Ariens line of snow blowers is exclusively gas-powered. They feature both single-stage and two-stage models.
Consequently, how does a hydrostatic transmission work on a snowblower?
The hydrostatic transmission allows you to set the ground speed to match snow conditions. The track drive attacks snow drifts like a tank and thanks to transmission disengagement, you can move it easily too.
Also Know, what does a friction disc do on a snowblower? The friction disc helps propel the snowblower forward. When the friction disc is in contact with the spinning drive wheel, the friction disc rotates and turns the axle. If the friction disc is worn or damaged, the snowblower moves slowly or erratically.
Also question is, how does snowblower drive work?
The friction disc sits flat at the bottom of the snow blower housing, between the wheels. When the drive handle is pulled down, the engagement cable tightens and raises the friction disc up slightly, causing it to engage the drive system and rotate the wheels. The friction disc is spun by a belt.
What is a friction disc transmission?
A friction drive or friction engine is a type of transmission that utilises 2 wheels in the transmission to transfer power to the driving wheels rather than a chain and sprockets system. Heat generation also requires a cooling system to keep the transmission working effectively.