The first 48 hours after applying epoxy are the most sensitive. You can walk on it in 24 hours, put objects back on it in 2 to 3 days, and drive on it in 7 to 10 days after the epoxy has fully cured. Two weeks is the typical cure time for industrial resin-based epoxy.
When can I walk on my epoxy floor?
Polyaspartic is ready to walk on after about 6 hours, according to the majority of experts, while epoxy takes about 25 hours (that extra hour counts). You should wait at least 48 to 72 hours before putting any heavy traffic or heavy equipment on your new floor.
Can I walk on epoxy after 12 hours?
Do not walk on the epoxy floor coating for at least 24 hours after it has been applied. If it’s 77° F or higher, light foot traffic is safe after 24 hours. Allow light foot traffic for 36–48 hours if the temperature is lower.
How long does epoxy floors take to dry?
Seven days is the average time it takes for epoxy floors to completely dry The epoxy floor in your garage or compound can be walked on after only 12-14 hours. And it can be fully functional in as little as 24 to 48 hours, though it could take a little longer on rare occasions.
How long does 5 Minute epoxy take to cure?
For a functional cure, 5-Minute Epoxy Gel requires 45 minutes to an hour to harden. At 24°C, full bond strength is achieved in 16 hours. A cool, dry place is recommended for long-term storage of Devcon Epoxy Adhesives.
Why can you walk on epoxy?
The curing process of epoxy is different from the drying process of other floor coatings. When the new floor coating is installed, traffic and heavy equipment can begin using it in as little as 72 hours. Even if you can’t use your floor for a few days, you can at least walk on it.