How to Adjust a Howard Miller Clock
- Move only the minute hand counterclockwise to set both the hour and minute.
- Push the winding key into the holes on the dial face.
- Turn the adjustment nut on the pendulum disk to change the speed of timekeeping.
- Move the chime dial located next to the dial to select the preferred chime melody.
Likewise, how do I adjust the chimes on my pendulum clock?
How to Adjust Chime Clocks
- Check the position of the minute hand of the clock when the top-of-the-hour strike occurs.
- Open the access panel door to the pendulum and bring it to a stop.
- Remove the minute hand retaining nut by turning it counterclockwise.
- Remove the minute hand from its arbor.
Beside above, how do I fix the chimes on my grandfather clock? There is a simple fix for this issue if your grandfather clock is striking the wrong hour.
- When your grandfather clock strikes the next hour, count the number of strikes.
- Move only the shorter hour hand to the number on the dial that you just counted when the clock chimed.
Hereof, how do you set a chiming wall clock?
To set the clock to the correct time, carefully turn the hands in a specific order. Set the minute hand first to the correct time and the hour hand should follow behind to the correct hour. If you have a knob for the hands, turn that clockwise or counterclockwise to get to the correct time.
How do you reset the chimes on a clock?
How to Reset My Chiming Clock
- Place one forefinger gently on the minute hand and push it lightly over to the number 12. Your clock will now naturally emit a series of chimes.
- Move the hour hand very gently to this number on the clock face.
- Push the minute hand around the clock until the clock displays the actual time.