How do I change the belt on my Ariens lawn mower?


Consequently, how do you tighten a riding lawn mower belt?

How to Tighten a Riding Lawnmower Belt

  1. Turn off the engine of your lawnmower and disconnect the spark plug wire as well.
  2. Locate the main frame tube on your lawnmower.
  3. Locate the belt, also known as the drive belt, inside the deck of your lawnmower.
  4. Tighten the belt of your lawnmower by shortening the location of the main frame inside the clamps.

Furthermore, can you adjust the drive belt on a Craftsman riding mower? When the blade drive belt on a Craftsman lawn mower wears, it loosens and begins to slip. In time the blades won’t rotate. Blade drive belts on Craftsman lawn mowers are not designed to be be adjusted and there is no mechanism for adjusting them.

Herein, what is a drive belt on a riding lawn mower?

The drive belt drives the rear axle and tires. It runs from the front pulley to a pulley located over the rear axle. You do not have to remove the deck. Put the belt on the front pulley and run it above the mower deck, through the belt tensioners, and back to the rear axle.

How do you change a transmission belt on a MTD lawn mower?

  1. Step 1: Position the mower to change the lawn mower belt.
  2. Step 2: Check the engine temperature before replacing the lawn mower belt.
  3. Step 3: Detach the spark plug wire.
  4. Step 4: Remove the cutting deck and battery.
  5. Step 5: Loosen the transaxle pulley.
  6. Step 6: Relieve tension on the upper drive belt.

20 Related Question Answers

Similar Asks